Journal of Aerospace Science and Technology

Journal of Aerospace Science and Technology

Author Index
A
  • Abedi, hasan VISCOUS NUTATION DAMPER, MODELING AND ANALYSIS [Volume 5, Issue 3, 2008, Pages 139-144]
  • Alashti, R. A. Parametric Study of Plastic Load of Cylindrical Shells With Opening Subject to Combined Loading [Volume 5, Issue 2, 2008, Pages 91-98]
B
  • Bahrainian, Seyed Saied Construction of Hexahedral Block Topology and its Decomposition to Generate Initial Tetrahedral Grids for Aerodynamic Applications [Volume 5, Issue 2, 2008, Pages 81-90]
  • Bakhtiari nejad, F. Bakhtiari nejad Preload Effect on Nonlinear Dynamic Behavior of Aerodynamic Two-Lobe Journal Bearings [Volume 5, Issue 4, 2008, Pages 145-159]
D
  • Darvizeh, M. Vibration analysis of FGM cylindrical shells under various boundary conditions [Volume 5, Issue 3, 2008, Pages 129-138]
  • Dr. Noor Azar, S. Salman Development of a novel method in TRMC for a Binary Gas Flow Inside a Rotating Cylinder [Volume 5, Issue 2, 2008, Pages 67-79]
  • Dr. Pourtakdoust, Seid H. TIME OPTIMAL SLEW MANEUVER OF MAGNETICALLY ACTUATED LEO SATELLITES [Volume 5, Issue 2, 2008, Pages 51-56]
  • Dr. Taghavi, Reza Numerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model [Volume 5, Issue 2, 2008, Pages 57-66]
G
  • Ganjaei, A. A. Development of a novel method in TRMC for a Binary Gas Flow Inside a Rotating Cylinder [Volume 5, Issue 2, 2008, Pages 67-79]
  • Ghahramani, Nematollah Incremental Predictive Command of Velocity to Be Gained Guidance Method [Volume 5, Issue 3, 2008, Pages 99-105]
H
  • Haddad Pour, Hassan Evaluation of 2-D Aeroelastic Models Based on Indicial Aerodynamic Theory and Vortex Lattice Method in Flutter and Gust Response Determination [Volume 5, Issue 4, 2008, Pages 180-182]
  • Hashemi, S. H. Experimental Study of Sable Crack Growth in Thin Aluminium Sheet [Volume 5, Issue 4, 2008, Pages 183-190]
  • Hemmatnezhad, Milad Vibration analysis of FGM cylindrical shells under various boundary conditions [Volume 5, Issue 3, 2008, Pages 129-138]
  • Heydari, Ali TIME OPTIMAL SLEW MANEUVER OF MAGNETICALLY ACTUATED LEO SATELLITES [Volume 5, Issue 2, 2008, Pages 51-56]
I
  • Irani, Saeid Analysis of a solid state wave gyroscope with thin shell cylindrical resonator and calculation of its conversion factor [Volume 5, Issue 4, 2008, Pages 167-174]
J
  • Jahangirian, Alireza The Effects of Shape Parameterization on the Efficiency of Evolutionary Design Optimization for Viscous Transonic Airfoils [Volume 5, Issue 1, 2008, Pages 35-43]
K
  • Kabir, Mohammad Zaman OPTIMUM DESIGN OF FILAMENT–WOUND LAMINATED CONICAL SHELLS FOR BUCKLING USING THE PENALTY FUNCTION [Volume 5, Issue 3, 2008, Pages 115-121]
  • Kadkhodayan, M. U-Bending Analysis with an Emphasis on Influence of Hardening Models [Volume 5, Issue 1, 2008, Pages 45-50]
  • Kamali, Reza NUMERICAL ANALYSIS OF MAVs FLAPPING WINGS IN UNSTEADY CONDITIONS [Volume 5, Issue 1, 2008, Pages 1-11]
  • Karami mohammadi, A. Karami mohammadi Preload Effect on Nonlinear Dynamic Behavior of Aerodynamic Two-Lobe Journal Bearings [Volume 5, Issue 4, 2008, Pages 145-159]
  • Khansari Zadeh, Seyed Mohammad Aircraft Visual Identification by Neural Networks [Volume 5, Issue 3, 2008, Pages 123-128]
L
  • Lashgari, M. Analysis of a solid state wave gyroscope with thin shell cylindrical resonator and calculation of its conversion factor [Volume 5, Issue 4, 2008, Pages 167-174]
N
  • Naghash, Abolqasem Incremental Predictive Command of Velocity to Be Gained Guidance Method [Volume 5, Issue 3, 2008, Pages 99-105]
O
  • Ovesy, H.R. Compressional Stability Behavior of Composite Plates with Multiple Through-the-Width Delaminations [Volume 5, Issue 1, 2008, Pages 13-22]
P
  • Pasandidefard Fard, Mohammad Numerical Simulation of Partial Cavitation over Axisymmetric Bodies: VOF Method vs. Potential Flow Theory [Volume 5, Issue 1, 2008, Pages 23-33]
R
  • Rashidi, R. Preload Effect on Nonlinear Dynamic Behavior of Aerodynamic Two-Lobe Journal Bearings [Volume 5, Issue 4, 2008, Pages 145-159]
  • Rojhani, Arash OPTIMUM DESIGN OF FILAMENT–WOUND LAMINATED CONICAL SHELLS FOR BUCKLING USING THE PENALTY FUNCTION [Volume 5, Issue 3, 2008, Pages 115-121]
S
  • Sadigh, Mohammad J. Gravity-Compensated Robust Control for Micro-Macro Space Manipulators During a Rest to Rest Maneuver [Volume 5, Issue 3, 2008, Pages 107-113]
  • Salehi, Ali Gravity-Compensated Robust Control for Micro-Macro Space Manipulators During a Rest to Rest Maneuver [Volume 5, Issue 3, 2008, Pages 107-113]
  • Shahrokhi, Ava The Effects of Shape Parameterization on the Efficiency of Evolutionary Design Optimization for Viscous Transonic Airfoils [Volume 5, Issue 1, 2008, Pages 35-43]
  • Sina, S.A. Evaluation of 2-D Aeroelastic Models Based on Indicial Aerodynamic Theory and Vortex Lattice Method in Flutter and Gust Response Determination [Volume 5, Issue 4, 2008, Pages 180-182]
  • Sohrabian, M. VISCOUS NUTATION DAMPER, MODELING AND ANALYSIS [Volume 5, Issue 3, 2008, Pages 139-144]
T
  • Towhidkhah, Farzad Incremental Predictive Command of Velocity to Be Gained Guidance Method [Volume 5, Issue 3, 2008, Pages 99-105]
Y
  • Yuan, G. Modeling and Simulation Research on Dynamics of Missiles with Deflectable Nose Control [Volume 5, Issue 4, 2008, Pages 161-166]