Aerospace Science and Technology
Mohammadreza Varshavi; Sahar Noori
Abstract
Air-breathing hypersonic flight is presumed by many of the savants in the field of aeronautical engineering as the last boundary of aerial vehicle design to be pushed back. An auspicious design configuration for the prospective hypersonic transport vehicles of the future is a “Waverider,” ...
Read More
Air-breathing hypersonic flight is presumed by many of the savants in the field of aeronautical engineering as the last boundary of aerial vehicle design to be pushed back. An auspicious design configuration for the prospective hypersonic transport vehicles of the future is a “Waverider,” using the Scramjet engine cycle as its propulsive system. Two-dimensional CFD Analysis and case-to-case study of three pre-defined waverider configurations with 2-ramp, 3-ramp, and 4-ramp inlet geometries are carried out in the hypersonic flight regime of Mach numbers 5, 6, and 7. This is done in an attempt to study the single-oriented and also correlative-oriented impacts of increasing/decreasing the number of inlet ramps and increasing/decreasing the flight Mach number upon the behavior of final aerodynamic coefficients and ratios. The paramount outcome of the present work is the generation of some tables which can be utilized as primary guidelines for aeronautical design engineers who are designing waverider configurations on a preliminary basis.
Aerospace Science and Technology
Sevda Rezazadeh Movahhed; Mohammad Ali Hamed
Abstract
The fixed-wing unmanned aerial vehicles (UAVs) have gained significant attention across diverse civilian and military applications in recent years, where precision control, advanced manoeuvrability, and elevated stealth capabilities are paramount. In order to design a robust control system to enable ...
Read More
The fixed-wing unmanned aerial vehicles (UAVs) have gained significant attention across diverse civilian and military applications in recent years, where precision control, advanced manoeuvrability, and elevated stealth capabilities are paramount. In order to design a robust control system to enable different tracking and path-following purposes, it is desired to establish a precise aerodynamic model. The research introduces a straightforward approach for accurately computing aerodynamic coefficients, essential for deriving aerodynamic forces and moments, particularly focusing on the rudderless flying-wing UAV models. Utilizing Digital DATCOM software, the study outlines a procedure for calculating the requisite aerodynamic coefficients of fixed-wing aircrafts. The data input card is prepared based on the design and physical attributes of the rudderless flying-wing Freya UAV model and its associated airfoil structure. Through the utilization of the input card in DATCOM software, computations are performed to determine static longitudinal/lateral stability, dynamic stability, and control coefficients, along with their derivatives. Additionally, a 3D model is constructed. The ensuing output file is then imported into the MATLAB environment for comprehensive analysis and integration into dynamic modelling for the design of control systems. The open-loop and closed-loop system performance analysis based on the obtained aerodynamic coefficients, shows acceptable values in terms of control surfaces and flight dynamics variables in the category of small-sized rudderless flying-wing UAVs which proves the reliability of the obtained results.
Aerospace Science and Technology
Parisa Ghanooni; Mostafa Kazemi; Mahmoud Mani
Abstract
This study focuses on improving performance of a supercritical wing equipped with winglets at different cant angles. This study aims to experimentally investigate the variation of aerodynamic performance of a supercritical wing of NASA Sc (2)-0410 airfoil at lower Reynolds numbers with winglets at various ...
Read More
This study focuses on improving performance of a supercritical wing equipped with winglets at different cant angles. This study aims to experimentally investigate the variation of aerodynamic performance of a supercritical wing of NASA Sc (2)-0410 airfoil at lower Reynolds numbers with winglets at various cant angles. The tests were performed by measuring the lift and drag force using a three-component balance within a broad range of angle of attack from -4 to 20 degrees and at three different subsonic flow velocities. Results include changes in lift, drag, and aerodynamic performance for each winglet cant angle compared to the baseline wing. The results show that winglets generally increase the lift force and decrease the drag force by decreasing the size and strength of the wingtip vortices. Moreover, the optimal winglet for each case is extracted based on the aerodynamic performance provided by each winglet. In order to better and more accurately compare the effect of different mounting angles of the winglet on the aerodynamic performance of the base wing, the impact of each winglet is shown separately. Accordingly, it is observed that the winglets with angles of 0o and 15 o, namely W0 and W15, have shown good performance in increasing the lift coefficient. Also, the winglet with 90 degrees has shown good performance in creating the least drag force.
