Aerospace Science and Technology
Mohammad Reza Salimi; Mohammad Taeibi Rahni; Abolfazl Amiri Hezaveh; Mehdi Zakyani Rodsari
Abstract
In present research, the interaction between single liquid droplet with particles inside a porous media is investigated numerically in two dimensions. The He’s model is used to simulate two phase flow and multiple relaxation time collision operator is implemented to increase numerical stability. ...
Read More
In present research, the interaction between single liquid droplet with particles inside a porous media is investigated numerically in two dimensions. The He’s model is used to simulate two phase flow and multiple relaxation time collision operator is implemented to increase numerical stability. Simulations have performed in three non-dimensional body forces of 0.000108, 0.000144, 0.000180, porosity values of 0.75, 0.8, 0.85 and Ohnesorge range of 0.19-0.76. In the range of investigated non-dimensional parameters, two distinct physics of droplet trapping and break up have observed. The related results revels that for every values of investigated non-dimensional body forces and porosity, there is a critical Ohnesorge number that droplet breaks up occurs for larger values. This critical value decreases as non-dimensional body force and porosity increases. Based on these results, a droplet trapping or break up behavioral diagram is drown with respect to the investigated density ratio, Ohnsorge, Reynolds and Capilary numbers.
Aerospace Science and Technology
Azadeh Kebriaee; Ali Nouri -Borujerdi; Ali Darvan
Abstract
The weaknesses of liquid propellants have led to special attention to gelled propellants in the last two decades as a way to overcome the weaknesses of these propellants. Previous studies have shown that the addition of gel-forming agents to liquid propellants converts these propellants, mainly Newtonian ...
Read More
The weaknesses of liquid propellants have led to special attention to gelled propellants in the last two decades as a way to overcome the weaknesses of these propellants. Previous studies have shown that the addition of gel-forming agents to liquid propellants converts these propellants, mainly Newtonian fluids, into non-Newtonian fluids, which greatly affects the physical properties of these propellants. In order to better understand the changes occurred in the physical properties of liquid propellants due to their gelled structure, on factors such as spraying and atomization, in this study, impinging jet injectors have been used to spray and atomize a non-Newtonian gelled fluid with rheological properties similar to gelled propellants. Analysis of the results of the present study shows that the use of impinging jet injectors causes different regimes of spraying and atomization (due to the jets’ high Reynolds number) for non-Newtonian gelled fluids, some of which being fundamentally different from the regimes formed for Newtonian fluids. In general, 4 regimes including stable closed rim, unstable closed rim with the formation of vermicular ligaments, open rim with successive formation of bow-shaped ligaments and a turbulent regime have been identified in this study. The properties of each of these regimes and their details will be explained in this paper.
