Document Type : Original Article

Authors

1 Department of Mechanical Engineering, Khatmol Anbia Air Defense, Tehran, Iran

2 Faculty of Structural Analysis and Simulation Centre, MalekAshtar University,Tehran, Iran

Abstract

In this article, the vibrational behavior of a spinning cylindrical thick shell carrying spring- mass systems and conveying viscos fluid flow under various temperature distributions is investigated. This structure rotates about axial direction and the formulations include the coriolis and centrifugal effects. In addition, this system is conveying viscous fluid, and the related force is calculated by modified Navier–Stokes relation considering slip boundary condition and Knudsen number. The modeled cylindrical thick shell, its equations of motion, and boundary conditions are derived by the principle of minimum total potential energy and based on a new three-dimensional refined higher-order theory (RHOST). For the first time in the present study, attached mass-spring systems has been considered in the rotating cylindrical thick shells conveying viscous fluid flow. The accuracy of the presented model is verified with previous studies. The novelty of the current study is consideration of the rotation, various temperature distributions, mass-spring systems and conveying viscous fluid flow implemented on proposed model using RHOST. Generalized differential quadrature method (GDQM) is presented to discretize the model and to approximate the governing equations. In this study the simply supported conditions has been applied to edges and cantilever boundary conditions has been studied in x=0, L. Finally, the effects of the velocity of viscous fluid flow, angular velocity, temperature changes and spring-mass systems on the critical speed, critical velocity, critical temperature and natural frequency of the structure are investigated.

Keywords

Main Subjects

[1] Bryan GH. (1890) On the beats in the vibrations of a revolving cylinder or bell. Proceedings of the Cambridge Philosophical Society. 101-111.
[2] DiTaranto R and Lessen M. (1964) Coriolis acceleration effect on the vibration of a rotating thin-walled circular cylinder. Journal of Applied Mechanics 31: 700-701.
[3] Srinivasan A and Lauterbach GF. (1971) Traveling waves in rotating cylindrical shells. Journal of Engineering for Industry 93: 1229-1232.
[4] Zohar A and Aboudi J. (1973) The free vibrations of a thin circular finite rotating cylinder. International Journal of Mechanical Sciences 15: 269-278.
[5] Pourmoayed A,  Malekzadeh Fard K and Shahravi M. (2017) Vibration Analysis of a Cylindrical Sandwich Panel with Flexible Core Using an Improved Higher-Order Theory. Latin American Journal of Solids and Structures 14: 714-742.
[6] Khalili S, Davar A and Fard KM. (2012) Free vibration analysis of homogeneous isotropic circular cylindrical shells based on a new three-dimensional refined higher-order theory. International Journal of Mechanical Sciences 56: 1-25.
[7] Jabbari M, Nejad MZ and Ghannad M. (2015) Thermo-elastic analysis of axially functionally graded rotating thick cylindrical pressure vessels with variable thickness under mechanical loading. International Journal of Engineering Science 96: 1-18.
[8] Nejad MZ, Jabbari M and Ghannad M. (2015) Elastic analysis of axially functionally graded rotating thick cylinder with variable thickness under non-uniform arbitrarily pressure loading. International Journal of Engineering Science 89: 86-99.
[9] Afshin A, Zamani Nejad M and Dastani K. (2017) Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions. Journal of Computational Applied Mechanics 48: 15-26.
[10] Firouz-Abadi R, Noorian M and Haddadpour H. (2010) A fluid–structure interaction model for stability analysis of shells conveying fluid. Journal of Fluids and Structures 26: 747-763.
[11] Bochkarev S and Matveenko V. (2013) Numerical analysis of stability of a stationary or rotating circular cylindrical shell containing axially flowing and rotating fluid. International Journal of Mechanical Sciences 68: 258-269.
[12] Paak M, Païdoussis M and Misra A. (2013) Nonlinear dynamics and stability of cantilevered circular cylindrical shells conveying fluid. Journal of Sound and Vibration 332: 3474-3498.
[13] Rabani Bidgoli M, Saeed Karimi M and Ghorbanpour Arani A. (2016) Nonlinear vibration and instability analysis of functionally graded CNT-reinforced cylindrical shells conveying viscous fluid resting on orthotropic Pasternak medium. Mechanics of Advanced Materials and Structures 23: 819-831.
[14] Shahsiah R and Eslami M. (2003) Thermal buckling of functionally graded cylindrical shell. Journal of Thermal Stresses 26: 277-294.
[15] Mirzavand B, Eslami MR and Shahsiah R. (2005) Effect of imperfections on thermal buckling of functionally graded cylindrical shells. AIAA journal 43: 2073-2076.
[16] Mirzavand B and Eslami M. (2006) Thermal buckling of imperfect functionally graded cylindrical shells based on the Wan–Donnell model. Journal of Thermal Stresses 29: 37-55.
[17] Huang H and Han Q. (2008) Buckling of imperfect functionally graded cylindrical shells under axial compression. European Journal of Mechanics-A/Solids 27: 1026-1036.
[18] Banerjee J. (2012) Free vibration of beams carrying spring-mass systems− A dynamic stiffness approach. Computers & structures 104: 21-26.
[19] Hozhabrossadati SM, Aftabi Sani A and Mofid M. (2016a) Free vibration analysis of a beam with an intermediate sliding connection joined by a mass-spring system. Journal of Vibration and Control 22: 955-964.
[20] Hozhabrossadati SM, Sani AA and Mofid M. (2016b) A closed-form study on the free vibration of a grid joined by a mass-spring system. Journal of Vibration and Control 22: 1147-1157.
[21] Hozhabrossadati SM, Sani AA and Mofid M. (2015) Vibration of beam with elastically restrained ends and rotational spring-lumped rotary inertia system at mid-span. International Journal of Structural Stability and Dynamics 15: 1450040.
[22] Tauchert TR. (1974) Energy principles in structural mechanics: McGraw-Hill Companies.
[23] M. Rabani Bidgoli, M. Saeed Karimi, and A. Ghorbanpour Arani, "Nonlinear vibration and instability analysis of functionally graded CNT-reinforced cylindrical shells conveying viscous fluid resting on orthotropic Pasternak medium," Mechanics of Advanced Materials and Structures, vol. 23, pp. 819-831, 2016.
[24] SafarPour H, Hosseini M and Ghadiri M. (2017) Influence of three-parameter viscoelastic medium on vibration behavior of a cylindrical nonhomogeneous microshell in thermal environment: An exact solution. Journal of Thermal Stresses: 1-15.
[25] Kadoli R and Ganesan N. (2006) Buckling and free vibration analysis of functionally graded cylindrical shells subjected to a temperature-specified boundary condition. Journal of Sound and Vibration 289: 450-480.
[26] Shafiei N, Mirjavadi SS, Afshari BM, et al. (2017) Nonlinear thermal buckling of axially functionally graded micro and nanobeams. Composite Structures 168: 428-439.
[27] Zeighampour H and Beni YT. (2014) Size-dependent vibration of fluid-conveying double-walled carbon nanotubes using couple stress shell theory. Physica E: Low-dimensional Systems and Nanostructures 61: 28-39.
[28] Ghadiri M, Shafiei N and Safarpour H. (2016) Influence of surface effects on vibration behavior of a rotary functionally graded nanobeam based on Eringen’s nonlocal elasticity. Microsystem Technologies: 1-21.
[29] Barooti MM, Safarpour H and Ghadiri M. (2017) Critical speed and free vibration analysis of spinning 3D single-walled carbon nanotubes resting on elastic foundations. The European Physical Journal Plus 132: 6.
[30] SafarPour H and Ghadiri M. (2017) Critical rotational speed, critical velocity of fluid flow and free vibration analysis of a spinning SWCNT conveying viscous fluid. Microfluidics and Nanofluidics 21: 22.
[31] Shu C. (2012) Differential quadrature and its application in engineering: Springer Science & Business Media.
[32] Civalek Ö. (2004) Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns. Engineering Structures 26: 171-186.
[33] Mirsky I and Herrmann G. (1957) Nonaxially symmetric motions of cylindrical shells. The Journal of the Acoustical Society of America 29: 1116-1123.
[34] Reddy J. (1984) Exact solutions of moderately thick laminated shells. Journal of Engineering Mechanics 110: 794-809.
[35] Armenàkas AE, Gazis DC and Herrmann G. (2016) Free vibrations of circular cylindrical shells: Elsevier.
[36] Loy C and Lam K. (1999) Vibration of thick cylindrical shells on the basis of three-dimensional theory of elasticity. Journal of Sound and Vibration 226: 719-737.
[37] Loy C, Lam K and Shu C. (1997) Analysis of cylindrical shells using generalized differential quadrature. Shock and Vibration 4: 193-198.